Gauge Block Auto-interferomometer
GBI |
Calculation Type Gauge Block Automatic Check Equipment
GBCD-100A |
Manual Calculation Type Gauge Block Comparator
GBCD-250 |
|
|
|
| - |
Interferometric measurement of gauge blocks |
| - |
Both steel and ceramic gauge blocks are available |
| - |
For detailed information‚ leaflet is available on request. |
|
| - |
Evaluates a gauge block with comparison measurement. |
| - |
Auto-measurement is made. |
| - |
For detailed information‚ leaflet is available on request. |
|
| - |
Evaluates a gauge block with comparison measurement |
| - |
Two detectors (upper and lower) are equipped |
| - |
For detailed information‚ leaflet is available on request. |
|
| |
|
|
| |
|
|
Manual Calculation Type Gauge Block Comparator
GBCS-250 |
Gauge Block for Micrometer Inspection
|
Optical Parallel
|
|
|
|
| - |
Evaluates a gauge block with comparison measurement. |
| - |
A single (upper) detector is equipped. |
| - |
For detailed information‚ leaflet is available on request. |
|
| - |
Used to inspect the Micrometer |
| - |
Provided with Steel and Ceramic |
|
| - |
Accessory for measuring the flatness and parallelism of micrometer measuring faces |
|
| |
|
|
| |
|
|
Optical Flat
|
Micrometer Standard
|
Micrometer Standard (for screw micrometer)
|
|
|
|
| - |
Accessory for measuring the flatness of micrometer measuring faces |
| - |
Used to measure the flatness of precision parts. |
|
| - |
Used to adjust the zero point of micrometers. |
|
| - |
Used to adjust the zero point of screw micrometers. |
|
| |
|
|
| |
|
|
Micrometer Standard (V-groove micrometer)
|
Micrometer stand
|
CERA Inside Micrometer Checker
|
|
|
|
| - |
Used to adjust the zero point of V-groove micrometers. |
|
| - |
Dedicated stand for stable measurement |
| - |
Four types are available according to the size. |
|
| - |
Used to properly and easily adjust the zero point of inside micrometers. |
| - |
Two models of 300mm and 600mm are available. |
| - |
The measuring faces are ceramic-tipped. |
|
| |
|
|
| |
|
|
Ring Gage
|
Depth Micro Checker
|
CERA Caliper Checker
|
|
|
|
| - |
Ring for setting the zero point |
| - |
A ceramic ring is also available. |
|
| - |
Zero-point adjusting master dedicated to depth micrometers |
| - |
Two models of 150mm and 300mm are available. |
|
| - |
Checker for accuracy inspection of calipers and height gages |
| - |
Two models of 300mm and 600mm are available. |
| - |
The measuring faces are ceramic-tipped. |
|
| |
|
|
| |
|
|
i-Checker‚ Indicator Inspection Machine
|
Calibration Tester
|
Color Cap
|
|
|
|
| - |
Checker for accuracy inspection of indicators |
| - |
Semi-auto measurement and auto measurement |
| - |
For detailed information‚ leaflet is available on request. |
|
| - |
Tester for accuracy inspection of dial indicators |
| - |
UDT-2 is used for indicators with a graduation of 0.01mm |
| - |
UDT-103/105 is used for indicators with a graduation of 0.001mm |
|
| - |
Used for measurement control of micrometers |
|
| |
|
|
| |
|
|
Bore Gage Zero Checker
|
Ring Master Inside Diameter Measurement Instrument
RM-120 |
Snap Gage Checker
|
|
|
|
| - |
Supports a wide measuring range for setting the zero point |
|
| - |
High-accuracy measuring instrument of ring gauges |
| - |
Enables absolute measurement‚ not comparison measurement. |
| - |
Reduces operation man hours associated with measurement. |
|
| - |
Checker dedicated to snap gages |
| - |
The measuring faces are ceramic-tipped. |
|
| |
|
|
| |
|
|
Color Ratchet Stop
|
Micrometer Lubricant
|
|
|
|
|
| - |
A specified nominal-size gauge block can be made. |
| - |
Made of low-expansion material |
| - |
Made in the specified shape (cross-section) |
|
| - |
Used for maintenance of gauge blocks. |
| - |
Includes all necessary maintenance tools. |
|
|
| |
|
|
